« previous next »
Pages: [1]   Go Down

Author Topic: Meet Frank...  (Read 2861 times)

Pete_R

  • Self-Coat
  • *****
  • Posts: 2,145
    • Contax 139 Resource
Meet Frank...
« on: January 22, 2012, 03:25:39 PM »
Frankenstein would be more appropriate. This was my Xmas holiday project that I've only just finished. It's made up from bits and pieces, hence the name.



It's a Schneider Angulon 90mm f6.8 (about 50 years old I think) mounted on a cone and lens board from a Crown Graphic which is attached to a reversed Mamiya bellows lens hood which is screwed to an aluminium plate cut from an old printing easel which is screwed to a wooden body made from bits I had in the garage. Topped off with very hi-tec elastic bands to hold the film holder in place.

Here's my first shot (Fomapan in Aculux)



A few problems with this but I was happy to get anything.

Here's one from today. (Fomapan in RO9)


I think I'm preferring the Fomapan in RO9 rather than Aculux.

Logged
"I've been loading films into spirals for so many years I can almost do it with my eyes shut."

Diane Peterson

  • Self-Coat
  • *****
  • Posts: 1,960
    • Diane Peterson Photography
Re: Meet Frank...
« Reply #1 on: January 22, 2012, 03:49:41 PM »
Not Frankenstein esque at all !! I think its beautiful...so many talented people on this forum...and wonderful results!
Logged

Paul Mitchell

  • Self-Coat
  • *****
  • Posts: 1,023
  • Heaven is PanF at f138
    • Paul Mitchell Photography
Re: Meet Frank...
« Reply #2 on: January 22, 2012, 03:54:56 PM »
To be Frank I think its bloody marvelous! Give me a shout when you want to attack the Ridgeway with our LF's Peter
Logged
When people ask what equipment I use - I tell them my eyes.

This-is-damion

  • Global Moderator
  • Self-Coat
  • *****
  • Posts: 1,349
    • Damion Rice
Re: Meet Frank...
« Reply #3 on: January 22, 2012, 03:55:33 PM »
I have to agree with the above...looks great!

nice work.

Logged

Nigel

  • Self-Coat
  • *****
  • Posts: 1,523
    • nigel rumsey photography
Re: Meet Frank...
« Reply #4 on: January 22, 2012, 04:36:01 PM »
Great work Peter, I'm very impressed. I've been thinking about doing something similar, but I think I need to start with a 5x4 pinhole and work up from there.
Logged
"Imagination is more important than knowledge." Albert Einstein

website

LT

  • Global Moderator
  • Self-Coat
  • *****
  • Posts: 5,030
Re: Meet Frank...
« Reply #5 on: January 22, 2012, 06:08:58 PM »
super stuff - with rubber bands and everything. Just like a home-made cam should look. Great results too.
Logged
L.

Phil Bebbington

  • Self-Coat
  • *****
  • Posts: 2,568
    • Phil Bebbington
Re: Meet Frank...
« Reply #6 on: January 22, 2012, 07:15:28 PM »
Peter, it is a thing of beauty!

Congratulations to your addition to the family
Logged

Late Developer

  • Self-Coat
  • *****
  • Posts: 4,033
    • My Website
Re: Meet Frank...
« Reply #7 on: January 22, 2012, 08:10:18 PM »
...........and next week, Peter is going to show us how to make a thermo-nuclear device out of two Fairy Liquid bottles, a used cereal box and two yards of sticky-back plastic....!!  :D

That is absolutely fantastic, Peter. I'm sure you could put that into production and sell it. Just brilliant.
Logged
"An ounce of perception. A pound of obscure".

Pete_R

  • Self-Coat
  • *****
  • Posts: 2,145
    • Contax 139 Resource
Re: Meet Frank...
« Reply #8 on: January 22, 2012, 08:19:55 PM »
Quote from: Late Developer on January 22, 2012, 08:10:18 PM
...........and next week, Peter is going to show us how to make a thermo-nuclear device out of two Fairy Liquid bottles, a used cereal box and two yards of sticky-back plastic....!!  :D

Actually, I might show you my home made 5x4 dev tubes complete with light trap, but I'm still refining the design so maybe it'll be a bit longer.
Logged
"I've been loading films into spirals for so many years I can almost do it with my eyes shut."

Francois

  • Self-Coat
  • *****
  • Posts: 15,707
Re: Meet Frank...
« Reply #9 on: January 22, 2012, 08:55:15 PM »
I must admit this is pretty sweet looking... I'm jealous!

As soon as this cold's over, I'll have to clean the workbench and come up with something new...
Logged
Francois

Film is the vinyl record of photography.

DS

  • Peel Apart
  • ***
  • Posts: 332
  • I don't look like my avatar
    • Waffle blag
Re: Meet Frank...
« Reply #10 on: January 22, 2012, 10:20:50 PM »
Quality. I salute you!

There's been quite a few cool home made LF creations on here lately. I'll have to post some pics of mine too. It is much uglier than yours.
Logged

Miles

  • Sheet Film
  • ****
  • Posts: 782
  • And lo, it came to pass ...
    • Just Flickr
Re: Meet Frank...
« Reply #11 on: January 22, 2012, 11:13:38 PM »
Very Cool, just needs a Flux Capacitor !
Logged

astrobeck

  • Guest
Re: Meet Frank...
« Reply #12 on: January 22, 2012, 11:45:07 PM »
and orchids blooming on your windowsill no less!

 :)
Good show!
Logged

original_ann

  • Self-Coat
  • *****
  • Posts: 1,276
Re: Meet Frank...
« Reply #13 on: January 23, 2012, 02:59:52 AM »
I'm completely wowed by your all-around photographic talent, Peter!  This is fantastic!
Logged

Sandeha Lynch

  • Self-Coat
  • *****
  • Posts: 1,669
    • Visual Records
Re: Meet Frank...
« Reply #14 on: January 23, 2012, 07:08:17 AM »
Brilliant !!  Good results so far - and much more to come, I'll warrant.
Logged

jojonas~

  • Self-Coat
  • *****
  • Posts: 2,928
  • back at 63° 49′ 32″ N
    • jojonas @ flickr
Re: Meet Frank...
« Reply #15 on: January 23, 2012, 02:05:00 PM »
nice~ it looks really well built! all sturdy looking. on the rails, is one screw for moving and the other for locking?
Logged
/jonas

Pete_R

  • Self-Coat
  • *****
  • Posts: 2,145
    • Contax 139 Resource
Re: Meet Frank...
« Reply #16 on: January 23, 2012, 02:24:43 PM »
Quote from: jojonas on January 23, 2012, 02:05:00 PM
nice~ it looks really well built! all sturdy looking. on the rails, is one screw for moving and the other for locking?

That's it. The movment is a bit coarse but it works.
Logged
"I've been loading films into spirals for so many years I can almost do it with my eyes shut."

Ed Wenn

  • Global Moderator
  • Self-Coat
  • *****
  • Posts: 4,295
  • Slowly getting back into it. Sometimes.
Re: Meet Frank...
« Reply #17 on: January 23, 2012, 11:31:42 PM »
Quote from: Peter R on January 23, 2012, 02:24:43 PM
That's it. The movement is a bit coarse but it works.

I'm never one to say no to a bit of coarse movement, Peter, but that aside, I too am very impressed by Frank and even more so by his maker. Lovely!
Logged

Suzi Livingstone

  • Sheet Film
  • ****
  • Posts: 771
    • Suzi Livingstone Photography
Re: Meet Frank...
« Reply #18 on: January 24, 2012, 08:15:34 PM »
Bootiful  ;D
Logged
Pages: [1]   Go Up
« previous next »