Topic: Ilford ULF Ordering

[jharr]

ULF ordering is now open. Does anyone know how to find/order the 50'x46mm rolls? They aren't listed on the authorized dealers' sites, so there must be some top secret way of getting on the list. I guess I'll send an email to Ilford directly, but I doubt they will respond to a one-off request like this. The 46mm stock is listed on the Ilford site as being available in multiples of 23, so it might be a long shot anyway for the 127 size, but since I am contemplating taking the plunge on a baby tlr, I might as well get some more film for it (thanks Terry for the new format addiction). Anyway, any advice is appreciated.

[Bryan]

Freestyle has it listed for pre-order.  I'm thinking about doing it but between this and the Konica 160 I'll have enough 127 to last a long time. 

http://www.freestylephoto.biz/1174843-Ilford-HP5+-400-ISO-46mm-x-50-ft.-UP-EI

[jharr]

I was looking for the Delta 100 rolls. Aside from that $2/ft isn't too bad for a specialty stock. Certainly it's much cheaper that way than buying rolls of 127. I have my eye on a reasonably priced Y44, so if that finds its way, I guess I'll go for the HP5 as well, though you are right, the roll of Konica 160 I have will probably last until this time next year at least. Thanks for the link.

[Bryan]

I didn't see that they were going to sell Delta 100 in 46mm, I would prefer that to the HP5 if I can get it. 

[jharr]

Hmmm... maybe I was looking at an old promotion sheet. I don't see it on this year's offering. I guess it's HP5 or whatever is on the bay.

[Terry]

James, thanks for the heads-up.  I might have to stock up on the HP5 this time.  I do see some nice Y44s on the evilbay.  One thing, though: avoid the 44a like the plague: it doesn't have the automatic frame counter, so you have to open the red window when you advance (ie, fogged film).  Go for one of the LM models (light meter) or one of the older crank-wind ones.

[jharr]

Done.
I got a Y44LM for $50. Hopefully the meter works. The LM does have a red window in the back cover. Is there a problem with the window on these? I have used other cameras with red windows and never had a problem with fogging film. I just cut a few 127 backing papers out of old 120's. Also there is a sliding cover on the window, so it is only open when you are actually winding. Let me know if there are gotchas you have experienced with this.

<edit>RTFM! The window is just to set the first frame position. Automatic frame spacing takes over after that.

[Terry]

James, the LM is a good one.  You only use the window once--to set up the first frame.  And you can do that in reduced light (presumably).  Once you have the first frame aligned you reset the counter to "1" and leave the red window closed until you've finished the roll.  I Usually put a piece of tape over the window, with the film type written on it.  A couple of rolls ago the tape came off and the window opened and I got three frames of slightly fogged film (along the edges).  I guess the cameras were designed for less sensitive films.

I have an LM on which the meter actually works--so it could happen!

I think you'll like the Y44.

edit: I just read your edit--disregard second sentence