Hi folks
I hate throwing things out if they are usable, but I don't need these and do need the space. In almost every case they didn't quite fit the standards they were designed for, so each one got remade - sometimes for my own cams, sometimes for a client. Some have been glued and removed, but there's no damage. The oldest has probably been in the cupboard for about five years.
Any of them might be good for a home build project/experiment if one of them suits the kind of size you'd want to work with. All I'm asking is a small donation (whatever it's worth to you against whatever your comfort zone, I guess - I mean, a fiver or a roll of bw film is not going to offend me) plus the postage cost.
First come (here) first served, naturally, so take note of the measurements. Rear standard measurement is the film gate opening, while the front standard measurement is the dimension of the outside of the fabric. Horizontal (with seam at bottom) followed by vertical (sides).
Approx Square, Green:
Rear: 130x120mm
Front: 125x115mm
Length: 300mm
Approx Square, Red:
Gone to a new project.Rear: 130x120mm
Front: 150x145mm
Length: 300mm
Left, Landscape:
Gone to a new project.Rear: 125x120mm
Front: 120x110mm
Length: 400mm
Right, Landscape (has front metal disk):
Gone to a new project.Rear: 130x105mm
Front: 122x112mm
Length: 350mm
Green Portrait (has front metal disk):
Gone to a new project.Rear: 140x115mm
Front: 80x80mm
Length: 200mm
Black Square:
Rear: 120x120mm
Front: 85x85mm
Length: 400mm