Author Topic: fuji fp100c negative recovery  (Read 1427 times)

gregor

  • Self-Coat
  • *****
  • Posts: 821
    • gregor jamroski photo
fuji fp100c negative recovery
« on: December 10, 2010, 02:37:01 PM »
As my supply of 665 ebbs and flows I have to look at alternatives.  Much impressed by the fuji fp-100c bleaching I've seen here and other places, the question is does developing on the 100c time-out or continue to develop unless peeled apart?  I'm hoping it does time-out as if I'm out and about I can peel them apart when I get home.

Thus far I've had success with the bleaching, but on shots I was around the house where I was able to peel-apart as per suggested development times and put the emulsion side on a shelf to dry and didn't need to carry them around for the day...

Thanks,

-G
« Last Edit: December 10, 2010, 03:09:34 PM by gregor »

Phil Bebbington

  • Self-Coat
  • *****
  • Posts: 2,568
    • Phil Bebbington
Re: fuji fp100c negative recovery
« Reply #1 on: December 10, 2010, 04:00:00 PM »
Gregor, I'm sure that Ed posted a while back that the Fuji film could be left for quite some time.

gregor

  • Self-Coat
  • *****
  • Posts: 821
    • gregor jamroski photo
Re: fuji fp100c negative recovery
« Reply #2 on: December 10, 2010, 04:08:23 PM »
thanks Phil - I looked through the old threads but didn't see that info. Will look again.

Phil Bebbington

  • Self-Coat
  • *****
  • Posts: 2,568
    • Phil Bebbington
Re: fuji fp100c negative recovery
« Reply #3 on: December 10, 2010, 04:11:22 PM »
It wasn't that long ago, I'm pretty sure it is self terminating.