Author Topic: the true death of POP  (Read 1485 times)

LT

  • Global Moderator
  • Self-Coat
  • *****
  • Posts: 5,030
the true death of POP
« on: March 30, 2009, 04:48:05 AM »
I'm a bit behind on all this, but I just saw this over at APUG as posted by Simon Galley from Ilford.  They've finally admitted defeat with POP, not totally shocking, but they always kept an open mind about it until this announcement last week.  I've checked the Harman Tech, Ilfordphoto and Kentmere websites and interestingly they havent added this to their news section.  I thought it might be of interest, albeit not really surprising.

Quote
HARMAN CONSOLIDATES KENTMERE RANGE:

Leading photo-imaging company, HARMAN technology Limited announces new product development and new supply arrangements for KENTMERE along with three unavoidable withdrawals.

When HARMAN technology Limited acquired KENTMERE PHOTOGRAPHIC in 2007it was always HARMAN's intention to maintain the existing KENTMERE monochrome range.

Recognising the enormous popularity of certain products, it pulled out all the stops to replicate many of the range's coating formulations at its state-of-the-art production facility at Mobberley. It has also used its expertise and infrastructure to increase batch-to-batch continuity and worldwide product availability - and has just launched KENTMERE film along with the existing paper products into the North American market through its US distributor WYNIT Inc and its Canadian distributor AMPLIS.

However, despite its good intentions and its considerable successes, such as the continuation of popular products like KENTMERE VC SELECT , HARMAN's best efforts have in part been thwarted by harsh commercial realities.

Following a decision, which has not been taken lightly, three KENTMERE products are to be withdrawn because they have proven themselves impossible to produce in a way that's either acceptable or economically viable. Contributing factors to this regrettable situation include global supply issues, changing legislation and an increasingly difficult trading climate, not just for HARMAN - but for all manufacturers.

The products concerned are :

KENTMERE CENTENNIAL POP ( Printing Out Paper )

Whilst demanded in relatively small volumes, HARMAN recognises that KENTMERE CENTENNIAL POP has a passionate following throughout the world and so announces with regret that this product can no longer be made.

The most significant reasons for this include the need for extremely elevated temperatures during the mnaufacturing process. There are also chemical additives involved in the coating that HARMAN does not wish to use from an employee health and safety perspective.

To adhere to the required production methods safely, and certainly in a way that at its bare minimum complies with UK health and safety legislation, would necessitate an enormous investment into HARMAN's factory. This cannot be justified due to the low volumes sold. HARMAN did look into the possibility of manufacturing elsewhere but feels it would be unethical and hypocritical to manufacture in a different country where employee health and safety requirements are perhaps less rigorous.

KENTMERE KENTONA

Current stocks of KENTMERE KENTONA - the unique, warmtone, glossy, chloro-bromide, fibre-based paper - are very good, but manufacturing of this product has now ceased as its emulsion cannot be replicated at HARMAN's plant.

The market has long requested a variable contrast version of KENTONA and HARMAN is pleased to announce that its product development department is now working on this as part of the launch of THREE NEW PAPERS within the KENTMERE FINEPRINT VC range. It is anticipated that this new warmtone, glossy paper will be available later in 2009.

THE KENTMERE ART COLLECTION

This range was withdrawn by KENTMERE prior to its acquisition by HARMAN technology Limited because the base substrates involved were no longer being manufactured. Despite extensive research, KENTMERE failed to find a comparable base suitable for quality photo coating.

Whilst HARMAN remains open to appropriate bases becoming available, the length of time since the production of these products means the chances of an economic re-launch at any time in the future is unfortuanately very small.

Speaking of the changes, Steven Brierley, Marketing Director at HARMAN technology Limited said. " The tremendous success we have enjoyed in seamlessly integrating KENTMERE into our business and increasing its availability worldwide has been somewhat tinged by the need to withdraw three products. If anyone was going to maintain them it was going to be HARMAN with our state-of-the-art coating and finishing facilities and our photo-imaging expertise which now stretches back 130 years. We apologise to those customers affected and reassure them that we did explore every feasible alternative before coming to this decision".

END
« Last Edit: March 30, 2009, 04:51:57 AM by leon taylor »
L.

Heather

  • Sheet Film
  • ****
  • Posts: 599
    • Stargazy Photography
Re: the true death of POP
« Reply #1 on: March 30, 2009, 07:42:18 AM »
Noticed a bit of wink & nudge from Mr Galley hinting at a certain rumour we may have heard elsewhere... Certainly sounds like the H&S rumour might have had a grain of truth in it.
Heather
ooh shiny things!
http://www.stargazy.org/

Photo_Utopia

  • Sheet Film
  • ****
  • Posts: 661
  • The artist also known as Mark Antony
    • Photo Utopia
Re: the true death of POP
« Reply #2 on: March 30, 2009, 10:43:34 AM »
Yes I saw it too, pretty sad. I have a couple of boxes of 5x7 I am going to have a play with this summer with my son. It is a shame that this unique emulsion has gone.
Mark
There's more to this photography thing than meets the eye.