Filmwasters
Which Board? => Main Forum => Topic started by: ChristopherCoy on January 18, 2013, 08:11:12 PM
-
To say that I love this camera is an understatement. I think I love it more than my 'Blad.... is that bad?
(http://farm9.staticflickr.com/8049/8393372522_9abc00105e.jpg) (http://www.flickr.com/photos/christophercoy/8393372522/)
WranglerBeach3a (http://www.flickr.com/photos/christophercoy/8393372522/#) by ChristopherCoy (http://www.flickr.com/people/christophercoy/), on Flickr
(http://farm9.staticflickr.com/8325/8392288383_95d415b454.jpg) (http://www.flickr.com/photos/christophercoy/8392288383/)
WranglerBeach (http://www.flickr.com/photos/christophercoy/8392288383/#) by ChristopherCoy (http://www.flickr.com/people/christophercoy/), on Flickr
And I really love it when accidents like this happen. I apparently didn't advance it enough and overlapped these images. It works for me though.
(http://farm9.staticflickr.com/8374/8393372536_2471eb41d1.jpg) (http://www.flickr.com/photos/christophercoy/8393372536/)
WranglerBeach2 (http://www.flickr.com/photos/christophercoy/8393372536/#) by ChristopherCoy (http://www.flickr.com/people/christophercoy/), on Flickr
-
Yashica love is pure, not bad ! :)
I have a 124G, and I think if I could have just one camera, that might be the one, because of the balance it strikes between image quality and weight. Lack of a flapping mirror means I can hand-hold at 1-30s - not something I can do with my Mamiya RZ67.
-
Yashica love is pure, not bad ! :)
I have a 124G, and I think if I could have just one camera, that might be the one, because of the balance it strikes between image quality and weight. Lack of a flapping mirror means I can hand-hold at 1-30s - not something I can do with my Mamiya RZ67.
I hand held a full second shot on my first roll and still got useable results!!
-
Hi Christopher,
Very nice photos! It doesn't surprise me that someone could love a Yashica 635 even more than a Blad. As you may know, I too am a happy 635 owner. Of the 30+ vintage cameras in my collection, my 635 is the one I most often grab to capture my Newfoundland landscapes. A real beauty, and a great performer. When folks first found out about my rather unique 635, (with its rare black radial dials) I was being offered ridiculous sums for it, but this is indeed one camera that I can never see myself parting with. It's that good.
I may have posted this image in a previous thread, but in case you haven't seen it, this was my very first 635 photo. It was taken last summer in front of our oceanfront home on Fogo Island, a one hour ferry ride off the northeast coast of Newfoundland.
Looking forward to seeing more photos from you!
Glen
(http://img.photobucket.com/albums/v217/camperbc/img041a800pix.jpg)
-
Kevin,
Here is a quick scan of my 1 second hand held shot. I was in a parking garage in Kemah Texas and the only light available was the coke machines and the yellow security lights. I held my breath, pushed the camera into my chest as hard as I could, and tripped the shutter as light as I could. Longest second of my life.
(http://farm9.staticflickr.com/8500/8392922717_8ccd4f1081.jpg) (http://www.flickr.com/photos/christophercoy/8392922717/)
Triple Coke (http://www.flickr.com/photos/christophercoy/8392922717/#) by ChristopherCoy (http://www.flickr.com/people/christophercoy/), on Flickr
-
Hi Christopher,
Very nice photos! It doesn't surprise me that someone could love a Yashica 635 even more than a Blad. As you may know, I too am a happy 635 owner. Of the 30+ vintage cameras in my collection, my 635 is the one I most often grab to capture my Newfoundland landscapes. A real beauty, and a great performer. When folks first found out about my rather unique 635, (with its rare black radial dials) I was being offered ridiculous sums for it, but this is indeed one camera that I can never see myself parting with. It's that good.
I may have posted this image in a previous thread, but in case you haven't seen it, this was my very first 635 photo. It was taken last summer in front of our oceanfront home on Fogo Island, a one hour ferry ride off the northeast coast of Newfoundland.
Looking forward to seeing more photos from you!
Glen
Nice shot Glen! Absolutely gorgeous!
Your 635 has black dials??? I'm intrigued....
-
Thanks Christopher, for your kind comment; much appreciated!
Regarding the black knobs, it is believed that sometime early in 1958 just a handful of 635's (possibly 10-20) left the factory with these black radial control dials, for whatever reason. When I bought my camera, I had at first assumed that someone may have replaced the knobs at some point, but the fellow who owned it before me was the original owner, and he was adamant that no modifications had ever been done to it. Also, after experts/serious collectors looked into this (comparing the serial numbers, etc) it was determined that mine was manufactured at the precise time that these few cameras had been given the different knobs. They believe that my 635 may quite possibly be the only remaining functioning 635 with these black dials. All the more reason why I'm going to hang onto it! There is mention of my unusual camera, and photos, at the informative "Yashica TLR" website, run by Paul Sokk. (Australia) Here is the link to it:
http://www.yashicatlr.com/66Models.html (http://www.yashicatlr.com/66Models.html)
And here are a couple pics of my odd 635.
Thanks again,
Glen
(http://img.photobucket.com/albums/v217/camperbc/DSC01615aselcol800pix.jpg)
(http://img.photobucket.com/albums/v217/camperbc/DSC01631a900pix.jpg)
-
WWWOOOWWW!!! That's flipping AWESOME!!!
So um... You wanna sell it?? ;) ;D
-
looks like a fine and breezy walk. and I understand the 635 love -I took mine as my only camera when I went to paris last fall ;)
-
I am a TLR over, too. I haven't tried my 635 yet, but I find the focusing knob on the same side as the shutter button somewhat problematic. I see how that was necessary with so many knobs on both sides, but I think it's faster to shoot when they are on different sides of the camera.
But of course I don't even know if it's a problem in practice.
-
WWWOOOWWW!!! That's flipping AWESOME!!!
So um... You wanna sell it?? ;) ;D
Hi Christopher,
Ha ha, nope... as I said, the fact that my camera is rare only makes me love it all the more. You know, crazy as it sounds, I've actually been advised to not use it at all, to keep it securely locked in a climate controlled cabinet, (Sheesh!) and to have a ton of insurance coverage. (I thought at first they were kidding!) But no, I certainly intend to use my camera as much as my misbehaving spine will allow me to get out with it. Lucky for me, it's in absolutely pristine condition, requiring nothing; it looks and functions as though made only yesterday.
Jonas, that is a lovely shot from Paris; would love to see more images from your trip.
Urban Hafner, I've never had issue with the focusing knob being on the same side as the shutter button, but of course as this is my first TLR, it's all I know. I'll be interested in hearing more about how you make out with your 635 once you get using it regularly. I'm sure you're going to love this camera as much as I do.
Kevin, I totally agree with you regarding the long exposures. I have taken great shots at a half second; something I have not been able to do with my other cameras.
I'm curious to know if any of you have the 35mm adapter kit, and if so, whether you ever shoot 35mm film with your 635? I have the adapter kit, but have yet to try it out. Might be a project for next week, if my spine allows, and I can get over this flu bug.
I just want to add that I was very happy to come across this thread, so thank-you Christopher, for posting it. For whatever reason, the 635 has continued to be a relative unknown, which really is a shame as it is such a lovely camera. Nice to see it getting some, ummm... exposure here! I think it would be nice to see more folks posting photos taken with their 635. So here's another one from me. It was taken the same evening as the shot above, near our home on Fogo Island. (I used Ilford Delta 100 Professional film, and developed it in Ilfosol 3; my first home developing since I was in high school, some 35 years ago)
Glen
(http://img.photobucket.com/albums/v217/camperbc/img050a800pix.jpg)
-
Glen,
I have all the accessories, including original leather Yashica case, manual, 35mm adapter kit, and even the Yashica branded satchel of silica gel. The only thing I don't have is the original box and receipt!
I have put the adapter in to make sure it worked, but I have yet to shoot a roll of 35mm with it. I can't bring myself to do it when I have the option for the bigger negative! LOL
Maybe that will be a weekly assignment for my 52 Roll project pretty soon.
-
Hey Glen!
Good to have you back.
-
Hey Glen!
Good to have you back.
Thanks Francois, and nice to see you too! Yeah, I've unfortunately been out of commission these past few months, thanks to my ongoing spinal issues that keep me bedridden most of the time. But I'm looking forward to getting back out there again very soon for more Fogo Island landscapes! I've been down but not completely out; have been adding more cameras to my bag, including a lovely little 35 year-old Vivitar 35ES rangefinder with its fantastic 40mm f/1.7 lens, and a 1951 Ensign Ranger 6X9 folder. And the other day my new Sony Alpha SLT-A57 DSLR arrived at my door, so some nice new toys to play with!
Christopher, that sure sounds like a nice 635 kit you have there! About the only thing I don't have is the case, but it does include a Yashica grip and cable release.
Glen
-
I need to find a cable release....
-
This is becaming the Yashica weekend thread! ;D
I'm also a proud owner of my 635, I didn't have much time to use but the very few rolls I run through I just love it!
(http://i907.photobucket.com/albums/ac277/sapata_photos/filmwasters/yashica3_zpsa0f97c27.jpg)
(http://i907.photobucket.com/albums/ac277/sapata_photos/yashicawaste1_zps646b6bc6.jpg)
(http://i907.photobucket.com/albums/ac277/sapata_photos/filmwasters/yashica8_zpsb3663c19.jpg)
(http://i907.photobucket.com/albums/ac277/sapata_photos/filmwasters/yashica12_zps814763de.jpg)
-
I am a TLR over, too. I haven't tried my 635 yet, but I find the focusing knob on the same side as the shutter button somewhat problematic. I see how that was necessary with so many knobs on both sides, but I think it's faster to shoot when they are on different sides of the camera.
But of course I don't even know if it's a problem in practice.
funny, I think I like it better than other TLRs I've tried just because of this.
(http://www.3106.net/photo/img/cam-yashGuide05.gif)
this is pretty much how I hold my yashica, letting it rest in my left hand
and my right hand on the right side, able to control both film advance and focus.
I use my thumbs for the shutter and aperture dials.
when using a yashica Mat I hate switching grips between each frame
(http://www.3106.net/photo/img/cam-yashGuide03.gif)
-
Hm. Well, I will have to try after the move. Right now most of my cameras are in boxes already.
-
give it a try urban, see if it suits you. I think there's cameras with generally better or worse handling capabilities butin the end, it's up to if the camera fits you :)
Jonas, that is a lovely shot from Paris; would love to see more images from your trip.
I'm curious to know if any of you have the 35mm adapter kit
I don't have the 35mm adapter kit but I've thought about using a loose roll off 35mm in the camera, make my own mask and everything. the camera would be a decent portrait kit then I guess :)
anyhow, here's some more paris shots since you asked
-
Very impressive images, as I expected... well done Jonas! I think this thread just may cause an increase in Yashica 635 purchases!
Glen
-
If this thread increased the price of the 635... well the Yashica-D is very very similar but wo 35 compatibility.
-
thanks glen!
If this thread increased the price of the 635... well the Yashica-D is very very similar but wo 35 compatibility.
if mine would break down beyond repair, that's the model I'm planning to go after. I like the dials for aperture and shutter speed.
-
Very nice camera, and stunning pictures. Woke my TLR GAS something awful.
Regarding TLR handling, if none of the above seem to agree with you, look up the Kalloflex. It has crank film wind, and a co-centric focusing knob on the photographers right. Shutter release on the lower left.
-
I've never seen something like that...
-
I guess you can add me to the list of people using his Yashica Mat (LM) while the Hasselblad sits. It's great at night, even without a tripod. This one was at 1/10 sec and turned out better than I had expected, but I won't be trying 1 second :-)
(http://i975.photobucket.com/albums/ae238/jawarden_photos/fScan-121103-0002_zps3341cb18.jpg)
My Yashica has focus and shutter on opposite sides of the camera, btw, making me wonder why the change.
-
Wow. That Kalloflex looks interesting Eirik. And just like you I have a problem with TLRs. 3 are already in my possession :) Still working on. Mamiya Csomething and maybe a Flexaret?
-
Wow. That Kalloflex looks interesting Eirik. And just like you I have a problem with TLRs. 3 are already in my possession :) Still working on. Mamiya Csomething and maybe a Flexaret?
I've had a C-33 in the past, and while I absolutely loved it and will own another some day... Trying to handle a C-33 is like trying to carry a Sherman tank compared to the 635.
-
I have three TLR's all yashica. Yashicamat with 80mm Lumaxar, and a Yashica-mat 124G. Just bought a Yashica D... because the 124G which was working great is having lots of small issues even after a CLA, the yashicamat focus knob is not too good. Because of these issues have not been shooting much. Had a Mamiya C330f, but decided to wait for a better example.
-
My Yashica has focus and shutter on opposite sides of the camera, btw, making me wonder why the change.
The yashicamat LM is a higher spec metered model with rollei type crank advance design. while the slightly older D/635 (regular/dlx) body is based on the yashicaflex AS. which also made 35mm capability easier as it requires a separate knob on the left.
-
Wow. That Kalloflex looks interesting Eirik. And just like you I have a problem with TLRs. 3 are already in my possession :) Still working on. Mamiya Csomething and maybe a Flexaret?
You can't go wrong with a Flexaret either. I've a Va and it performs very well. You of course have the more rudimentary aperture and speed adjustments a la the earlier Yashicas et el, but the focusing arm underneath the taking lens is such a good feature Minolta copied it on the Autocord. The Belar lens is a Tessar copy and works very well. As is the Prominar on the Kalloflex, also very good.
-
autocord, now there's an slr with a stunner for a lens! -tack sharp :)
that Kalloflex looks interesting~
talking about looks, I wouldn't mind having a fujicaflex around the house ;)
(http://kanscamera.sakura.ne.jp/restore/p131/fujicaflex-11.jpg) it's 2.8 too! :o
-
I'd settle for just the Fujicaflex plate :)
The font is stunning </graphic design fan mode off>
-
Boy, a beaut indeed. And no doubt a good lens too. I have yet to experience a poor Fujinon lens. Makes me want to give up 35mm altogether and go all out TLR. Now there is a thought ;)
-
the fujicaflex has a single knob to control focusing and winding the film. Shutter button is removable to the left or right side.
-
I'm going to have to try a one-second exposure now !
I remember about 30 years ago, my father had a 635 and for some reason there was a problem loading 120 film. I was so ignorant of photography, I just thought that if he could load 35mm film with the adapter, there was no problem !
I was wondering how Yashica owners with cases use the cases ? With my 124G, I have the full case, but leave off the top part as it's just too unwieldy (often the camera will be inside another camera bag, giving more protection.) I like to leave the bottom half of the case on the camera, but the problem is that prevents a tripod being attached.
I'm thinking about drilling the bottom of the case so that the tripod socket is exposed - has anybody else done this, or do case designs of other models already expose the tripod socket ?
My latest Yashicamat shots are here:
http://kevinthephotographer.wordpress.com/2013/01/22/a-walk-in-the-woods-with-snow-and-a-yashicamat/ (http://kevinthephotographer.wordpress.com/2013/01/22/a-walk-in-the-woods-with-snow-and-a-yashicamat/)
Kevin
-
That Fujicaflex is amazing!
-
I haven't had my 635 in its case since I bought the camera. Just too awkward for me... and besides, the camera is far too pretty to cover up!
Glen
-
I've had two Yashica TLRs, neither worked particularly well. Shame, because I would like to have a nice one! I've had a Rolleicord and Rolleiflex, but I mostly stick to my Bronica S2 and C SLRs these days. I would like a nice TLR again, though.
-
Very impressive images, as I expected... well done Jonas! I think this thread just may cause an increase in Yashica 635 purchases!
Glen
I just happened to see a 635 in an antique store yesterday, with the 35mm adaptor, case, etc. I had a brief moment to check it out, and had high hopes for picking it up at a reasonable price - $95.00 US - but the shutter release doesn't do anything! I was disappointed, since the price seemed pretty fair. When I got home last night I checked on the auction site, and found that Glen's prediction has come true! They are now listed in the $250-$400 range! Maybe I need to go back and snatch that one up! Does anyone think the shutter issue is a simple fix, or would it cost me tons of money to get it operational again?
I didn't get to inspect the lenses too much regarding haze, scratches, fungus, etc. but the rest of it seemed in pretty good shape.
As an aside, the same seller also had 2 DeVry bakelite 35mm cameras - circa 1928 or so - for sale as well. I had never seen one, and they were interesting gizmos!
Mark
-
I just happened to see a 635 in an antique store yesterday, with the 35mm adaptor, case, etc. I had a brief moment to check it out, and had high hopes for picking it up at a reasonable price - $95.00 US - but the shutter release doesn't do anything! I was disappointed, since the price seemed pretty fair. When I got home last night I checked on the auction site, and found that Glen's prediction has come true! They are now listed in the $250-$400 range! Maybe I need to go back and snatch that one up! Does anyone think the shutter issue is a simple fix, or would it cost me tons of money to get it operational again?
I didn't get to inspect the lenses too much regarding haze, scratches, fungus, etc. but the rest of it seemed in pretty good shape.
Just for the record... http://www.markhama.com/ (http://www.markhama.com/) seems to be the US Yashica "go to" guy for repairs.
If I were you, I would go back to the antique store, show them that the camera is inoperable and offer them $30/$40/$50 for it - and then send it to Mark Hama for repairs.
ETA: You might try calling Mr. Hama directly and asking him. I emailed him about a CLA quote the other day and he got back to me within a few days.
-
Or you can buy this one for $149us with free shipping... with a return policy.
http://www.ebay.com/itm/121052238166?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 (http://www.ebay.com/itm/121052238166?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649)
-
Thanks for the suggestions. I had considered offering $30 or $40, just to see what might happen, but the shop is about 30 miles from me so I won't be able to get down there 'til maybe Sunday. In the meantime I'll keep my eye on the Ebay auction! One way or the other I'll end up with a clean 635 somewhere down the road!
m
-
Hi Mark,
Personally, I'd likely be hesitant to buy the one from the posted link. I have been following that seller's listings forever, and I believe they sometimes use stock photos, and would not accurately represent the condition of the camera. I could be wrong, but I sometimes see what appear to me to be identical photos used over and over in their listings.
I agree that it would be advantageous to offer a reduced amount for the one you saw in the antique shop, and hire Mr. Hama to make it ship-shape for you. Even if you had to pay the entire $95... with Mr. Hama's CLA figured into it the equation, you would still have an affordable Yashica 635 in good working order. And I think it's a safe bet that it will quickly become your favorite camera!
Let us know how you make out!
Glen
-
How many 635 auctions do you watch Glen? I wanna know who my bidding competition is!! LOL
-
No worries Christopher... I have no plans to buy a second 635; I just like to look. Mind you, there's currently a gorgeous Yashica 24 listed which looks like it's never even been out of the box. hmmmm...
Glen
-
No worries Christopher... I have no plans to buy a second 635; I just like to look. Mind you, there's currently a gorgeous Yashica 24 listed which looks like it's never even been out of the box. hmmmm...
Glen
And you don't post an item number??? >:( :D
-
yashica 24 can take 120 film some people dont know that. The 24 tend to have a meter button by the focus knob. most even have start markings for 120 in the film chamber. At the end of the 12 exposure, remember to take some blank exposures to advance the film into the take up spool as it does not wind freely as it thinks it is longer 220 film.
-
Sorry Christopher; here's the Yashica 24 that I'm drooling over at the moment:
http://www.ebay.ca/itm/370744730827?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649 (http://www.ebay.ca/itm/370744730827?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649)
And here's an equality lovely Yashica Mat 124G:
http://www.ebay.ca/itm/261161880262?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649 (http://www.ebay.ca/itm/261161880262?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649)
Glen
-
Damn that exchange rate!! That'd be $250usd for me!