Filmwasters

Which Board? => Main Forum => Topic started by: Bryan on November 08, 2019, 08:00:03 PM

Title: It's the weekend November 8 -10, 2019
Post by: Bryan on November 08, 2019, 08:00:03 PM: Olympus OM-2n with a Zuiko Auto-s 50mm f/1.4 lens shot on Ektachrome 100. All shot in Honolulu last week, just got them back from the lab.

(https://live.staticflickr.com/65535/49034473027_2c421ecddf.jpg) (https://flic.kr/p/2hH1uuK)Windows in Windows (https://flic.kr/p/2hH1uuK) by Bryan Chernick (https://www.flickr.com/photos/60348236@N07/), on Flickr

(https://live.staticflickr.com/65535/49034253396_568640f3d0.jpg) (https://flic.kr/p/2hGZnd1)Department of Transportation Building (https://flic.kr/p/2hGZnd1) by Bryan Chernick (https://www.flickr.com/photos/60348236@N07/), on Flickr

(https://live.staticflickr.com/65535/49033753713_86c73f1215.jpg) (https://flic.kr/p/2hGWNEM)Chinese Herbal Magic Lotion (https://flic.kr/p/2hGWNEM) by Bryan Chernick (https://www.flickr.com/photos/60348236@N07/), on Flickr
Title: Re: It's the weekend November 8 -10, 2019
Post by: Kai-san on November 08, 2019, 08:24:13 PM: Nice start, I must try the new Ektachrome when the light returns.

Ihagee Exakta Varex IIA / Schneider Kreuznach Xenon 50mm f1.9 / Rollei Blackbird in Rodinal
Title: Re: It's the weekend November 8 -10, 2019
Post by: kentish cob on November 08, 2019, 08:26:54 PM: Seems an age since I've posted anything in a weekend thread.
This was taken on the walk home from the pub...
Olympus OM4 - Delta 3200
Title: Re: It's the weekend November 8 -10, 2019
Post by: 02Pilot on November 08, 2019, 08:33:45 PM: Developed my first film in months, some of which (apparently) has been sitting around for the better part of a year. Here's one that's been scanned.

(https://live.staticflickr.com/65535/49029700962_4e1f87e32e_c.jpg)
Title: Re: It's the weekend November 8 -10, 2019
Post by: grit on November 08, 2019, 09:05:27 PM: I made my first platinum print this weekend!

Scanned a 4x5 negative flat (no Negafix or anything), adjusted only the contrast, and printed onto 8x10 pictorico. Used the Platinum printing kit from Bostick and Sullivan, on Bergger COT 320 paper. 10 minutes in the sun did the trick. Came out pretty good! Thanks to all who gave suggestions in an earlier thread I made.

(https://live.staticflickr.com/65535/49035037221_6b6c1ebda4_z.jpg) (https://flic.kr/p/2hH4ode)
Title: Re: It's the weekend November 8 -10, 2019
Post by: Sandeha Lynch on November 09, 2019, 01:19:20 PM: Something for the weekend? The Homemade Camera Zine - issue No 1.

A wonderful collection of functioning film cameras from around the www, now in print.

The print version was pre-order only, but a free pdf of the zine is available at homemadecamera.com (http://homemadecamera.com/the-zine/)

(https://live.staticflickr.com/65535/49037213368_789ae63a41_o.jpg) (https://flic.kr/p/2hHfx71)
IMG_20191109_124050a (https://flic.kr/p/2hHfx71) by Sandeha Lynch (https://www.flickr.com/photos/sandeha/), on Flickr
Title: Re: It's the weekend November 8 -10, 2019
Post by: EarlJam on November 09, 2019, 02:19:01 PM: I've been neglecting my Rollei's for a while now, so dragged the 35SE out of the closet for a spin around the neighborhood.

Bergger 400
Title: Re: It's the weekend November 8 -10, 2019
Post by: zapsnaps on November 11, 2019, 09:11:44 AM: Sandeha: I downloaded the homemade camera zine - there are some really interesting creations there. Thanks for the link.
Title: Re: It's the weekend November 8 -10, 2019
Post by: Sandeha Lynch on November 11, 2019, 09:37:48 AM: There are, Zap, there are indeed. Everything from foamboard to 3D printing.

PS. Thanks for not reporting me for a digi shot in this thread. ;D ;D ;D