Filmwasters
Which Board? => Main Forum => : Kayos January 25, 2015, 08:18:45 AM
-
As title, I've done some googling but not found anything usefull, I expected as its a "set" process it would have been x minutes extra per stop in the developer, but this info seems elusive
Anyone done this with any success?
-
Not done it but found this
https://www.flickr.com/groups/ishootfilm/discuss/72157623180751409/ (https://www.flickr.com/groups/ishootfilm/discuss/72157623180751409/)
and this
https://groups.google.com/forum/#!topic/bit.listserv.nppa-l/i6WB91hg7co (https://groups.google.com/forum/#!topic/bit.listserv.nppa-l/i6WB91hg7co)
-
Thanks for that, both interesting reading
-
I know it's doable. But you get strange color shifts with the process. It's usually recommended for stage photography as the lights already screw-up the balance anyways.
-
Did someone say "strange color shifts"? Might have to try this... ;)
-
Underexposing and normal processing may give colour shifts. No need to push process to get that ;) . If you're going to scan the film, then correcting white balance is easy enough.
Portra 400 has gained a reputation for being very robust to both over and underexposure, with little need for pushing or pulling. From 100-1600 on the same roll is doable. I've done 100-800 and hardly noticed any ill effect. Overexposed images tend to gain more grain in the highlights, underexposed more mirky shadows.
-
I guess we're at a point where pushing C-41 film can be a no-choice option. There used to be Fantastic 1600 ISO film by Fuji and a mind blowing 3200 film from Konica.... all gone. All that's left is Portra 800
-
If you're going to scan the film, then correcting white balance is easy enough.
The potential problem is that the three layers will react differently and so you can get different colour shifts in the highlights than in the shadows and that can't be fixed with white balance. You would have to individually change the curves. But in reality it's probably not a big enough problem to worry about.
-
Exactly.
-
I was just admiring some indoor shots on Ektar 100 pushed to 400 the other day.
Turns out, we have some right here on the board. :)
http://www.filmwasters.com/forum/index.php?topic=2149.msg19504#msg19504 (http://www.filmwasters.com/forum/index.php?topic=2149.msg19504#msg19504)
I like Ektar on cloudy days and I have a 120 roll burning a hole in my pocket, so I'm going to try it. My local lab charges something like $1 per stop either direction, but worth the experiment.
-
If you're going to scan the film, then correcting white balance is easy enough.
The potential problem is that the three layers will react differently and so you can get different colour shifts in the highlights than in the shadows and that can't be fixed with white balance. You would have to individually change the curves. But in reality it's probably not a big enough problem to worry about.
You are right of course. But once you get the hang of it, it isn't that difficult. Then again, I do not batch scan films, I adjust scanning parameters for each and every frame I find worth scanning.
-
Two examples of Kodak portra 400 pushed to 1600, both indoors.
And hi to all Filmwasters fellas!! I have not been posting for a while but I have kept visiting and enjoying the forum 8)
(https://farm8.staticflickr.com/7561/15565503459_478d29c337_c.jpg) (https://flic.kr/p/pHtgTi)Pentax 67 55mm kodak portra 400 pushed to 1600 (https://flic.kr/p/pHtgTi) by calbisu (https://www.flickr.com/people/13885136@N03/), on Flickr
(https://farm8.staticflickr.com/7579/15903017889_a8bf21b036_c.jpg) (https://flic.kr/p/qei8aB)Pentax 67 Kodak portra 400 pushed to 1600 (https://flic.kr/p/qei8aB) by calbisu (https://www.flickr.com/people/13885136@N03/), on Flickr
-
I was just admiring some indoor shots on Ektar 100 pushed to 400 the other day.
Turns out, we have some right here on the board. :)
http://www.filmwasters.com/forum/index.php?topic=2149.msg19504#msg19504 (http://www.filmwasters.com/forum/index.php?topic=2149.msg19504#msg19504)
I like Ektar on cloudy days and I have a 120 roll burning a hole in my pocket, so I'm going to try it. My local lab charges something like $1 per stop either direction, but worth the experiment.
Not bad. But to be honest, can't quite see the point of pushing Ektar to 400, when there are still quite a few 400 emulsions still available. But pushing 400 and 800 stocks to 1600 and beyond I do understand, other options sadly lacking.
-
I guess we're at a point where pushing C-41 film can be a no-choice option. There used to be Fantastic 1600 ISO film by Fuji and a mind blowing 3200 film from Konica.... all gone. All that's left is Portra 800
Ive just been given some fuji 1600 about 8 years out of date
-
Pushing some Fuji Superia 400 35mm to 1600 was pretty easy. This cheap film performed really well, just followed what it said in the package and scanned with very little color adjustment and little grain.
(https://farm3.staticflickr.com/2868/10241820486_6a7b8edae2.jpg) (https://flic.kr/p/gB31pQ)img027 (https://flic.kr/p/gB31pQ) by Cadha13 (https://www.flickr.com/people/38317871@N03/), on Flickr
The cheap Fuji films and Portra tend to push very well.
I tend to pull some old film, like some Konica 160 to 50 I have and develop at normal time and blix for another 2-3 minutes more. Just trying to clear out the base fog and restore as much of the image as well. Getting some crazy color shifts is pretty normal.
(https://farm3.staticflickr.com/2848/12943228555_ca38a98a12.jpg) (https://flic.kr/p/kHKqV2)01 (https://flic.kr/p/kHKqV2) by Cadha13 (https://www.flickr.com/people/38317871@N03/), on Flickr
It's fun to experiment, it's always interesting.
-
Well, this is all very inspiring :) I think I shall try pushing and pulling willy-nilly, as all the color film I have is out of date and of questionable storage. And if you could introduce me to that young lass in the first picture I would greatly appreciate it :)
-
Pushing some Fuji Superia 400 35mm to 1600 was pretty easy. This cheap film performed really well, just followed what it said in the package and scanned with very little color adjustment and little grain.
The cheap Fuji films and Portra tend to push very well.
I tend to pull some old film, like some Konica 160 to 50 I have and develop at normal time and blix for another 2-3 minutes more. Just trying to clear out the base fog and restore as much of the image as well. Getting some crazy color shifts is pretty normal.
Can you confirm you are actually push/pull processing these films? Because pushing and pulling happen in development if you don't change the development time you're just under/over exposing and relying on latitude of the emulsions.
You can push C41 easily with a Tetenal kit the rule of thumb being 30 seconds extra development time per stop with fresh solution
Here is Portra 400 developed in Tetenal kit to EI 1600 development time 4 min 30 seconds.
(https://farm8.staticflickr.com/7213/6992552296_f967811646_c.jpg) (https://www.flickr.com/photos/51840227@N02/6992552296/)
statue (https://www.flickr.com/photos/51840227@N02/6992552296/) by Photo Utopia (https://www.flickr.com/people/51840227@N02/), on Flickr
So pushing happens in the developer, not in the camera.
-
I was just admiring some indoor shots on Ektar 100 pushed to 400 the other day.
Turns out, we have some right here on the board. :)
http://www.filmwasters.com/forum/index.php?topic=2149.msg19504#msg19504 (http://www.filmwasters.com/forum/index.php?topic=2149.msg19504#msg19504)
I like Ektar on cloudy days and I have a 120 roll burning a hole in my pocket, so I'm going to try it. My local lab charges something like $1 per stop either direction, but worth the experiment.
Not bad. But to be honest, can't quite see the point of pushing Ektar to 400, when there are still quite a few 400 emulsions still available. But pushing 400 and 800 stocks to 1600 and beyond I do understand, other options sadly lacking.
Personally when I have pushed films is because there was not enough available light at the spot and I did not have any other film with me, so pushing the film was one, if not the only, of the available options, whereas it was tmax 100, 400 or Ektar
-
^welcome back! don't be a stranger now.
I'm currently running some portra 400 @800 through my M5. Not much of a push but I will have it processed at 800.
-
Not bad. But to be honest, can't quite see the point of pushing Ektar to 400, when there are still quite a few 400 emulsions still available.
http://instagram.com/p/yORt0rrIkm/?modal=true (http://instagram.com/p/yORt0rrIkm/?modal=true)
Because it's pretty? :)