Filmwasters
Which Board? => Main Forum => Topic started by: charles binns on November 29, 2018, 04:24:02 PM
-
It's been a while since I posted here.
I'm planning to make my own camera, wet plate holders, dip trays etc so I can start wet plate work. Does anyone have any plans (or links to plans on the interweb) for simple cameras and plate holders? I'm not looking to make anything fancy - a sliding box camera such as these https://www.flickr.com/groups/1139489@N25/pool/ (https://www.flickr.com/groups/1139489@N25/pool/) would be brilliant.
Thanks!
-
Not plans as such but some good images of parts of the Bulldog large format cameras that you can assemble yourself.
http://www.bulldogcameras.com/Bulldog%20Instructions.pdf (http://www.bulldogcameras.com/Bulldog%20Instructions.pdf)
Mike
-
You could start with something like an Afghan box camera that has a few modifications...
https://www.afghanboxcamera.com/ (https://www.afghanboxcamera.com/)
This would allow you to completely skip the plate holders and simply use a black transport box.
I know some people modify existing film holders to fit a plate from the back side. They cut a hole in the divider and use wire at the corners to hold the plate in.
-
great idea, look forward to seeing the results!
just stumbled across this https://www.lomography.com/magazine/334208-a-photographer-s-diy-8-x-10-large-format-camera (https://www.lomography.com/magazine/334208-a-photographer-s-diy-8-x-10-large-format-camera)